×

HOW TO REQUEST A QUOTE

1 Go To Product Page.
2 Open Particular Product Page.
3 Below The Product Name, Click
On ADD TO QUOTE BUTTON.

If you still have problems, please let us know, by sending an email to sales@prideindustries.com.au Thank you!

HOURS

Mon-Fri 8:00AM - 5:00PM
Saturday & Sundays Close!

Basin Set- White/Gold

T09521 / 2800.02

Categories: ,

Description

T09521 / 2800.02

WELS 5 Star Rating / 5.5 litres per minute 

DISMANTLING YOUR OLD TAPWARE

  • Turn off water at mains.
  • Remove the sink/basin spout by undoing the brass or plastic spout fixing nut (A) under your basin, then rotate and pull the spout up.
  • Remove all items on top of your sink/basin (hot and cold buttons, handles, bonnets with spindles, jumper valves and any other fixtures but not the
    actual tap bodies or water pipes).

INSTALLING THE NEW TAPS

  • Check the new spindle for the correct length by comparing it with the old spindle you removed. Use the spindle extension to make up the difference if necessary.
  • Fit the new top assembly as shown in the diagram, making sure the fibre washer is positioned underneath the bonnet, and the jumper valve is placed into position.
  • Screw the tap flange onto the bonnet.
  • You can now install your tap handle and hot/cold button.

THE NEW SPOUT ASSEMBLY

  • Look at the thread on the end of the old spout neck: pick your new nipple where the long thread is identical, and screw it onto the end of the new spout neck, using thread tape included to make a waterproof seal.

INSTALLATION

  • Push the new spout assembly onto the existing nipple, using a small amount of soapy water or cooking oil for lubrication. Finally, tighten the new spout assembly to the sink/basin using the brass or plastic spout fixing nut (A).
  • Turn taps

 

Additional information

Finish

White Gold
Ivory Gold
Matte Black Gold

TOP