×

HOW TO REQUEST A QUOTE

1 Go To Product Page.
2 Open Particular Product Page.
3 Below The Product Name, Click
On ADD TO QUOTE BUTTON.

If you still have problems, please let us know, by sending an email to sales@prideindustries.com.au Thank you!

HOURS

Mon-Fri 8:00AM - 5:00PM
Saturday & Sundays Close!

HOTRUN 38VE

Category:

Description

A HOTRUN 38VE is generally used for single point of use hand wash basin, not suitable for kitchens / showers / baths. This model has a variable digital programmable temperature limiter to 38, 45 or 50°C depending on the situation, for example HOTRUN 38VET-50, ELWA product code 21380 for a model with a 50°C limiter built-in.

Water connections: Each HOTRUN 38 comes with a fitted electric cord and 2 flexible hoses and a 1.9 ltr/min flow regulator easy to connect always with supplied 1/2″ BSP flexible hoses. The flow regulator is fitted on or in the cold water inlet fitting of the water heater. Normal mains pressure is required (min 60 kPa constant)

Electrical connection: A HOTRUN 38VE needs a dedicated single phase 16Amp circuit direct from the distribution board hard wired usually to an isolator switch positioned next to the HOTRUN on the right hand side.

TOP