×

HOW TO REQUEST A QUOTE

1 Go To Product Page.
2 Open Particular Product Page.
3 Below The Product Name, Click
On ADD TO QUOTE BUTTON.

If you still have problems, please let us know, by sending an email to sales@prideindustries.com.au Thank you!

HOURS

Mon-Fri 8:00AM - 5:00PM
Saturday & Sundays Close!

HOTRUN 48VE

Category:

Description

A HOTRUN 48VE is generally used for single point of use hand wash basin applications in cooler climates instead of a  HOTRUN 38VE, in warmer climates for small kitchenettes etc. not suitable for kitchens/showers/baths.

This model has a variable digital programmable temperature limiter to 38, 45 or 50°C depending on the situation, for example HOTRUN 48VET-45, ELWA product code 2114845 for a model with a 45°C limiter built-in.

Water connections: Each HOTRUN 48VE comes with a fitted electric cord and 2 flexible hoses and a 2.5 ltr/min flow regulator easy to connect always with supplied 1/2″ BSP flexible hoses. The flow regulator is fitted on or in the cold water inlet fitting of the water heater. Normal mains pressure is required (min 60 kPa constant)

Electrical connection: A HOTRUN 48VE needs a dedicated single phase 20Amp circuit direct from the distribution board hard wired usually to an isolator switch positioned right next to the HOTRUN on the right hand side.

TOP