×

HOW TO REQUEST A QUOTE

1 Go To Product Page.
2 Open Particular Product Page.
3 Below The Product Name, Click
On ADD TO QUOTE BUTTON.

If you still have problems, please let us know, by sending an email to sales@prideindustries.com.au Thank you!

HOURS

Mon-Fri 8:00AM - 5:00PM
Saturday & Sundays Close!

HOTRUN 60VE

Category:

Description

A HOTRUN 60VE is generally used for single or double hand wash applications and for small kitchenettes etc. not suitable for residential or commercial kitchen sinks/showers/baths. Unless used for a kitchenette this model has a variable digital programmable temperature limiter to 38, 45 or 50°C depending on the situation, for example HOTRUN 60VET-50 ELWA product code 216050 for a model with a 50°C limiter built-in.

Water connection: Each HOTRUN 60VE comes with a fitted electric cord and 2 flexible hoses and a specific flow regulator of 3 ltr/min, ready to connect always with supplied 1/2″ BSP flexible hoses. The supplied flow regulator is fitted on or in the cold water inlet fitting of the water heater. Normal mains pressure is required (min 60 kPa constant)

Electrical connection: A HOTRUN 60VE needs a dedicated single phase 25Amp circuit direct from the distribution board hard wired usually to an isolator switch positioned next to the HOTRUN on the right hand side.

TOP