×

HOW TO REQUEST A QUOTE

1 Go To Product Page.
2 Open Particular Product Page.
3 Below The Product Name, Click
On ADD TO QUOTE BUTTON.

If you still have problems, please let us know, by sending an email to sales@prideindustries.com.au Thank you!

HOURS

Mon-Fri 8:00AM - 5:00PM
Saturday & Sundays Close!

HOTRUN 75VE

Category:

Description

A HOTRUN 75VE is suitable for single or double hand wash applications and in warmer climate areas for a kitchen sink and shower etc. Not suitable to fill a bath. Unless used for a kitchen this model has a variable digital programmable temperature limiter to 38, 45 or 50°C depending on the situation, for example HOTRUN 75VET-50, ELWA product code 227550 for a model with a 50°C limiter built-in.

Water connections: Each HOTRUN 75VE comes with a fitted electric cord and 2 flexible hoses and a flow regulator of 4 ltr/min, ready to connect always with supplied 1/2″ BSP flexible hoses. The supplied flow regulator is fitted on or in the cold water inlet fitting of the water heater. Normal mains pressure is required (min 60 kPa constant).

Electrical connection: A HOTRUN 75VE needs a dedicated single phase 32Amp or double pole 16Amp circuit direct from the distribution board hard wired usually to an isolator switch positioned next to the HOTRUN on the right hand side.

TOP